zener diodes 1 publication date: february 2002 ske00007bed parameter symbol conditions min typ max unit forward voltage v f i f = 10 ma 0.9 1.0 v zener voltage * 2 v z i z specified value v zener knee operating resistance r zk i z specified value ? zener operating resistance r z i z specified value ? reverse current i r v r specified value a temperature coefficient of zener voltage * 3 s z i z specified value mv/ c parameter symbol rating unit repetitive peak forward current i frm 200 ma total power dissipation * p tot 150 mw junction temperature t j 150 c storage temperature t stg ? 55 to + 150 c common electrical characteristics t a = 25 c * 1 note) * : with a printed circuit board refer to the list of the electrical characteristics within part numbers note) 1. rated input/output frequency: 5 mhz y 2. * 1 : the v z value is for the temperature of 25 c. in other cases, carry out the temperature compensation. * 2: guaranteed at 20 ms after power application. * 3: t j = 25 c to 150 c note) the part number in the parenthesis shows conventional part number. marking symbol refer to the list of the electrical characteristics within part numbers (example) maz80820h : 8^2 note) l/m/h marked products will be sup- plied unless other wise specified maz8000 series (ma8000 series) silicon planar type for stabilization of power supply features ? extremely low noise voltage caused from the diode (2.4 v to 39 v, 1/3 to 1/10 of our conventional maz3000 series) ? extremely good rising performance (in the low-current range) ? easy-to-select the optimum diode because of their finely divided zener-voltage ranks ? guaranteed reliability, equivalent to that of conventional products (mini type package) ? allowing to reduce the mounting area, thickness and weight sub- stantially, compared with those of the conventional products ? allowing both reflow and flow mode of automatic soldering ? allowing automatic mounting by an existing chip mounter absolute maximum ratings t a = 25 c unit: mm 1: anode 2: cathode eiaj: sc-90a smini2-f1 package 5? 5? 1.25 0.1 0.7 0.1 2.5 0.2 1.7 0.1 0.4 0.1 0 to 0.1 (0.15) 0.16 0.5 0.1 1 2 +0.1 ?.06 0.35 0.1 0 to 0.1
maz8000 series ske00007bed 2 maz8024 2.28 2.40 2.60 5 120 1.0 100 5 ??? 1.6 5 2.4 maz3024 maz8027 2.50 2.70 2.90 2_7or2^7 maz3027 maz80270l 2.50 2.60 2.75 5 120 1.0 110 5 ??? 2.0 5 2_7 maz30270l maz80270h 2.65 2.80 2.90 2^7 maz30270h maz8030 2.80 3.00 3.20 3_0or3^0 maz3030 maz80300l 2.80 2.90 3.05 5 50 1.0 120 5 ??? 2.1 5 3_0 maz30300l maz80300h 2.95 3.10 3.20 3^0 maz30300h maz8033 3.10 3.30 3.50 3_3or3^3 maz3033 maz80330l 3.10 3.20 3.35 5 20 1.0 130 5 ??? 2.4 5 3_3 maz30330l maz80330h 3.25 3.40 3.50 3^3 maz30330h maz8036 3.40 3.60 3.80 3_6or3^6 maz3036 maz80360l 3.40 3.50 3.65 5 10 1.0 130 5 ??? 2.4 5 3_6 maz30360l maz80360h 3.55 3.70 3.80 3^6 maz30360h maz8039 3.70 3.90 4.10 3_9or3^9 maz3039 maz80390l 3.70 3.80 3.97 5 10 1.0 130 5 ??? 2.5 5 3_9 maz30390l maz80390h 3.87 4.00 4.10 3^9 maz30390h maz8043 4.00 4.30 4.60 4_3or4 ? 3or4^3 maz3043 maz80430l 4.03 4.10 4.26 5 10 1.0 130 5 ??? 2.5 5 4_3 maz30430l maz80430m 4.17 4.30 4.40 4 ? 3 maz30430m maz80430h 4.31 4.40 4.54 4^3 maz30430h maz8047 4.40 4.70 5.00 4_7or4 ? 7or4^7 maz3047 maz80470l 4.45 4.60 4.69 5 2.0 1.0 80 5 800 1.0 ? 1.4 5 4_7 maz30470l maz80470m 4.59 4.70 4.83 4 ? 7 maz30470m maz80470h 4.74 4.90 4.99 4^7 maz30470h maz8051 4.80 5.10 5.40 5_1or5 ? 1or5^1 maz3051 maz80510l 4.87 5.00 5.12 5 1.0 2.0 60 5 500 1.0 ? 0.8 5 5_1 maz30510l maz80510m 5.00 5.10 5.26 5-1 maz30510m maz80510h 5.14 5.30 5.40 5^1 maz30510h maz8056 5.30 5.60 6.00 5_6or5 ? 6or5^6 maz3056 maz80560l 5.30 5.40 5.58 5 0.5 2.5 40 5 200 0.5 1.2 5 5_6 maz30560l maz80560m 5.48 5.60 5.76 5 ? 6 maz30560m maz80560h 5.66 5.80 5.95 5^6 maz30560h maz8062 5.80 6.20 6.60 6_2or6 ? 2or6^2 maz3062 maz80620l 5.85 6.00 6.15 5 0.2 4.0 30 5 100 0.5 2.3 5 6_2 maz30620l maz80620m 6.05 6.20 6.36 6 ? 2 maz30620m maz80620h 6.24 6.40 6.56 6^2 maz30620h maz8068 6.40 6.80 7.20 6_8or6 ? 8or6^8 maz3068 maz80680l 6.44 6.60 6.77 5 0.1 4.0 20 5 60 0.5 3.0 5 6_8 maz30680l maz80680m 6.64 6.80 6.98 6 ? 8 maz30680m maz80680h 6.85 7.00 7.20 6^8 maz30680h maz8075 7.00 7.50 7.90 7_5or7 ? 5or7^5 maz3075 maz80750l 7.07 7.30 7.43 5 0.1 5.0 20 5 60 0.5 4.0 5 7_5 maz30750l maz80750m 7.29 7.50 7.67 7 ? 5 maz30750m maz80750h 7.51 7.70 7.89 7^5 maz30750h maz8082 7.70 8.20 8.70 8_2or8 ? 2or8^2 maz3082 maz80820l 7.77 7.90 8.17 5 0.1 5.0 20 5 60 0.5 4.6 5 8_2 maz30820l maz80820m 8.03 8.20 8.43 8 ? 2 maz30820m maz80820h 8.29 8.50 8.70 8^2 maz30820h electrical characteristics within part numbers t a = 25 c part number v z (v) i r r z r zk s z (mv/ c) i z ( a) v r ( ? )i z ( ? )i z i z min nom max (ma) max (v) max (ma) max (ma) typ (ma) conventional products marking symbol temperature coefficient of zener voltage zener voltage reverse current zener operating resistance
maz8000 series ske00007bed 3 v z (v) i r r z r zk s z (mv/ c) i z ( a) v r ( ? )i z ( ? )i z i z min nom max (ma) max (v) max (ma) max (ma) typ (ma) maz8091 8.50 9.10 9.60 9_1or9 ? 1or9^1 maz3091 maz80910l 8.58 8.80 9.02 5 0.1 6.0 20 5 60 0.5 5.5 5 9_1 maz30910l maz80910m 8.87 9.10 9.33 9 ? 1 maz30910m maz80910h 9.14 9.40 9.60 9^1 maz30910h maz8100 9.40 10.00 10.60 10_or10 ? or10^ maz3100 maz81000l 9.44 9.70 9.92 5 0.05 7.0 30 5 60 0.5 6.4 5 10_ maz31000l maz81000m 9.75 10.00 10.25 10 ? maz31000m maz81000h 10.07 10.30 10.59 10^ maz31000h maz8110 10.40 11.00 11.60 11_or11 ? or11^ maz3110 maz81100l 10.40 10.70 10.94 5 0.05 8.0 30 5 60 0.5 7.4 5 11_ maz31100l maz81100m 10.73 11.00 11.28 11 ? maz31100m maz81100h 11.05 11.30 11.60 11^ maz31100h maz8120 11.40 12.00 12.70 12_or12 ? or12^ maz3120 maz81200l 11.40 11.70 11.96 5 0.05 9.0 30 5 80 0.5 8.4 5 12_ maz31200l maz81200m 11.73 12.00 12.33 12 ? maz31200m maz81200h 12.06 12.30 12.68 12^ maz31200h maz8130 12.40 13.00 14.10 13_o13 ? or13^ maz3130 maz81300l 12.40 12.70 12.99 5 0.05 10.0 35 5 80 0.5 9.4 5 13_ maz31300l maz81300m 12.73 13.00 13.40 13 ? maz31300m maz81300h 13.25 13.70 14.08 13^ maz31300h maz81400m 13.65 14.00 14.35 5 0.05 10.0 40 5 80 0.5 10.0 5 14 ? maz31400m maz8150 13.90 15.00 15.60 15_or15 ? or15^ maz3150 maz81500l 13.90 14.30 14.76 5 0.05 11.0 40 5 80 0.5 11.4 5 15_ maz31500l maz81500m 14.60 15.00 15.35 15 ? maz31500m maz81500h 14.95 15.30 15.60 15^ maz31500h maz8160 15.30 16.00 17.10 16_or16 ? or16^ maz3160 maz81600l 15.30 15.70 16.09 5 0.05 12.0 50 5 80 0.5 12.4 5 16_ maz31600l maz81600m 15.70 16.00 16.50 16 ? maz31600m maz81600h 16.26 16.70 17.10 16^ maz31600h maz8180 16.90 18.00 19.10 18_or18 ? or18^ maz3180 maz81800l 16.90 17.30 17.76 5 0.05 13.0 60 5 80 0.5 14.4 5 18_ maz31800l maz81800m 17.55 18.00 18.45 18 ? maz31800m maz81800h 18.20 18.70 19.10 18^ maz31800h maz8200 18.80 20.00 21.20 20_or20 ? or20^ maz3200 maz82000l 18.85 19.30 19.81 5 0.05 15.0 80 5 100 0.5 16.4 5 20_ maz32000l maz82000m 19.50 20.00 20.50 20 ? maz32000m maz82000h 20.15 20.70 21.19 20^ maz32000h maz8220 20.80 22.00 23.30 22_or22 ? or22^ maz3220 maz82200l 20.80 21.30 21.86 5 0.05 17.0 80 5 100 0.5 18.4 5 22_ maz32200l maz82200m 21.45 22.00 22.55 22 ? maz32200m maz82200h 22.10 22.70 23.24 22^ maz32200h maz8240 22.80 24.00 25.60 24_or24 ? or24^ maz3240 maz82400l 22.80 23.30 23.97 5 0.05 19.0 100 5 120 0.5 20.4 5 24_ maz32400l maz82400m 23.50 24.00 24.70 24 ? maz32400m maz82400h 24.35 25.00 25.60 24^ maz32400h maz8270 25.10 27.00 28.90 27_or27 ? or27^ maz3270 maz82700l 25.30 26.00 26.70 2 0.05 21.0 120 2 120 0.5 23.4 2 27_ maz32700l maz82700m 26.30 27.00 27.70 27 ? maz32700m maz82700h 27.30 28.00 28.70 27^ maz32700h electrical characteristics within part numbers (continued) t a = 25 c part number conventional products marking symbol temperature coefficient of zener voltage zener voltage reverse current zener operating resistance
maz8000 series ske00007bed 4 maz8300 28.00 30.00 32.00 30_or30 ? or30^ maz3300 maz83000l 28.30 29.00 29.70 2 0.05 23.0 160 2 160 0.5 26.6 2 30_ maz33000l maz83000m 29.30 30.00 30.80 30 ? maz33000m maz83000h 30.20 31.00 31.80 30^ maz33000h maz8330 31.00 33.00 35.00 33_or33 ? or33^ maz3330 maz83300l 31.20 32.00 32.80 2 0.05 25.0 200 2 200 0.5 29.7 2 33_ maz33300l maz83300m 32.20 33.00 33.80 33 ? maz33300m maz83300h 33.20 34.00 34.90 33^ maz33300h maz8360 34.00 36.00 38.00 36_or36 ? or36^ maz3360 maz83600l 34.10 35.00 35.90 2 0.05 27.0 250 2 250 0.5 33.0 2 36_ maz33600l maz83600m 35.10 36.00 36.90 36 ? maz33600m maz83600h 36.10 37.00 37.90 36^ maz33600h maz8390 37.00 39.00 41.00 39_or39 ? or39^ ? maz83900l 37.10 38.00 39.00 2 0.05 30.0 300 2 300 0.5 35.6 2 39_ ? maz83900m 38.00 39.00 40.00 39 ?? maz83900h 39.00 40.00 41.00 39^ ? electrical characteristics within part numbers (continued) t a = 25 c 0 0 200 160 120 80 40 50 100 150 200 250 ambient temperature t a ( c ) power dissipation p tot ( mw ) heat sink copper foil 0.8 mm 0.8 mm 0.001 024681012 0.01 0.1 1 10 0.005 0.05 0.5 5 50 100 zener voltage v z ( v ) zener current i z ( ma ) t a = 25 c static charac- teristics maz8062 maz8068 maz8075 maz8082 maz8091 maz8100 maz8024 maz8039 maz8047 maz8051 maz8043 maz8056 0.001 0 102030405060 0.01 0.1 1 10 0.005 0.05 0.5 5 50 100 zener voltage v z ( v ) zener current i z ( ma ) t a = 25 c static charac- teristics maz8160 maz8200 maz8240 maz8360 maz8390 maz8110 maz8130 note) 1. the v z value is the one after power application for 20 ms at t a = 25 c. 2. the zener voltage temperature coefficient is the one for t j = 25 c to 150 c. p tot ? t a i z ? v z i z ? v z part number v z (v) i r r z r zk s z (mv/ c) i z ( a) v r ( ? )i z ( ? )i z i z min nom max (ma) max (v) max (ma) max (ma) typ (ma) conventional products marking symbol temperature coefficient of zener voltage zener voltage reverse current operating resistance
maz8000 series ske00007bed 5 0.001 024681012 0.01 0.1 1 10 0.005 0.05 0.5 5 50 100 zener voltage v z ( v ) zener current i z ( ma ) t j = 25 c dynamic charac- teristics maz8100 maz8091 maz8082 maz8075 maz8068 maz8062 maz8056 maz8051 maz8047 maz8043 maz8039 maz8033 maz8027 maz8024 0.001 0 102030405060 0.01 0.1 1 10 0.005 0.05 0.5 5 50 100 zener voltage v z ( v ) zener current i z ( ma ) t j = 25 c dynamic charac- teristics maz8110 maz8130 maz8160 maz8200 maz8240 maz8360 maz8390 1 10 100 5 50 500 1 000 0.1 1 0.3 3 30 300 100 10 1 000 zener operating resistance r z ( ? ) zener current i z ( ma ) t a = 25 c maz8047 maz8039 maz8051 maz8056 maz8062 maz8068 maz8160 maz8390 maz8024 maz8100 maz8082 maz8043 0.01 0 0.2 0.4 0.6 1.0 0.8 1.2 0.1 1 10 100 50 5 0.5 0.05 forward voltage v f ( v ) forward current i f ( ma ) t a = 25 c 15 5 ? 5 20 25 0 10 01020 4050 30 zener current i z ( ma ) temperature coefficient of zener voltage s z ( mv / c ) maz8240 maz8160 maz8100 maz8068 maz8039 maz8024 1 5 10 50 100 0.1 0.5 100 10 1 0.1 0.01 0.05 0.5 5 50 pulse width t w ( ms ) non-repetitive reverse surge power dissipation p zsm ( w ) maz8039 maz8075 t a = 25 c t w non repetitive p zsm 0.1 0.5 1 5 10 0.01 0.05 100 10 1 0.1 0.01 0.05 0.5 5 50 pulse width t w ( s ) thermal impedance z th ( c / mw ) with head sink (typ. value) without heat sink (typ. value) heat sink copper foil 0.8 mm 0.8 mm i z ? v z i z ? v z r z ? i z i f ? v f s z ? i z p zsm ? t w z th ? t w
please read the following notes before using the datasheets a. these materials are intended as a reference to assist customers with the selection of panasonic semiconductor products best suited to their applications. due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. b. panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. therefore, panasonic will not assume any liability for any damages arising from any errors etc. that may ap- pear in this material. c. these materials are solely intended for a customer's individual use. therefore, without the prior written approval of panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the internet or in any other way, is prohibited. request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese govern- ment if any of the products or technologies described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative character- istics and applied circuit examples of the products. it does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) the products described in this material are intended to be used for standard applications or gen- eral electronic equipment (such as office equipment, communications equipment, measuring in- struments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. at the final stage of your design, purchas- ing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the guaranteed values, in particular those of maxi- mum rating, the range of operating power supply voltage and heat radiation characteristics. other- wise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) when using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) no part of this material may be reprinted or reproduced by any means without written permission from our company. 2001 mar
|
